1200 smog machine is a perfect and steady smog machine with circuitry design and strong times feeling.

The following points have to be considered during the inspection:
 
1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).
3)Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4)The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the ligh
1) Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of  dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit  contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents
There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions  ."
Should you need any spare parts, please order genuine parts from your local dealer.
 
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents
 
There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions  ."
Should you need any spare parts, please order genuine parts from your local dealer.